Question Page | Examsbook

प्र: A receiving host has failed to receive all of the segments that it should acknowledge. What can the host do to improve the reliability of this communication session? 1308 0

उत्तर : 4. "Decrease the window size"
व्याख्या :
Answer: D) Decrease the window size Explanation: A receiving host can control the transmitter by using flow control ( TCP uses windowing by default). By decreasing the window size, the receiving host can slow down the transmitting host so the receiving host does not overflow its buffers.

प्र: When a station sends a transmission to the MAC address ff : ff : ff : ff : ff : ff, what type of transmission is it? 2416 0

उत्तर : 4. "Broadcast"
व्याख्या :
Answer: D) Broadcast Explanation: A transmission to the MAC address ff : ff : ff : ff : ff : ff is a broadcast transmission to all stations.

प्र: If a switch has three computers connected to it, with no VLANs present, how many broadcast and collision domains is the switch creating? 2193 0

उत्तर : 3. "one broadcast and three collision"
व्याख्या :
Answer: C) one broadcast and three collision Explanation: If a switch has three computersconnected to it, with no VLANs present , one broadcast and three collision domains are created.

प्र: If a hub has three computers connected to it, how many broadcast and collision domains is the hub creating? 3118 0

उत्तर : 4. "One broadcast and one collision"
व्याख्या :
Answer: D) One broadcast and one collision Explanation: If a hub has three computers connected to it, one broadcast and one collision domain is created

प्र: What is the purpose of flow control? 1248 0

उत्तर : 3. "To provide a means for the receiver to govern the amount of data sent by the sender"
व्याख्या :
Answer: C) To provide a means for the receiver to govern the amount of data sent by the sender Explanation: Flow control allows the receiving device to control the transmitter so the receiving device's buffer does not overflow.

प्र: Which layer combines bits into bytes and bytes into frames, uses MAC addressing , and provides error detection? 1024 0

उत्तर :
व्याख्या :
The Data Link layer is responsible for the framing of data packets.

प्र: Which layer is responsible for converting data packets from the Data Link layer into electrical signals? 1363 0

उत्तर :
व्याख्या :
The physical layer takes frames from the Data Link layer and encodes the 1s and 0s into a digital signal for transmission on the network medium.

प्र: At which layer is routing implemented , enabling connections and path selection between two end systems? 1581 0

प्र: A receiving host has failed to receive all of the segments that it should acknowledge. What can the host do to improve the reliability of this communication session? 1308 0

प्र: When a station sends a transmission to the MAC address ff : ff : ff : ff : ff : ff, what type of transmission is it? 2416 0

उत्तर : 4. "Broadcast"
व्याख्या :
Answer: D) Broadcast Explanation: A transmission to the MAC address ff : ff : ff : ff : ff : ff is a broadcast transmission to all stations.

प्र: If a switch has three computers connected to it, with no VLANs present, how many broadcast and collision domains is the switch creating? 2193 0

उत्तर : 3. "one broadcast and three collision"
व्याख्या :
Answer: C) one broadcast and three collision Explanation: If a switch has three computersconnected to it, with no VLANs present , one broadcast and three collision domains are created.

प्र: If a hub has three computers connected to it, how many broadcast and collision domains is the hub creating? 3118 0

उत्तर : 4. "One broadcast and one collision"
व्याख्या :
Answer: D) One broadcast and one collision Explanation: If a hub has three computers connected to it, one broadcast and one collision domain is created

प्र: What is the purpose of flow control? 1248 0

प्र: Which layer combines bits into bytes and bytes into frames, uses MAC addressing , and provides error detection? 1024 0

उत्तर :
व्याख्या :
The Data Link layer is responsible for the framing of data packets.

प्र: Which layer is responsible for converting data packets from the Data Link layer into electrical signals? 1363 0

उत्तर :
व्याख्या :
The physical layer takes frames from the Data Link layer and encodes the 1s and 0s into a digital signal for transmission on the network medium.

प्र: At which layer is routing implemented , enabling connections and path selection between two end systems? 1581 0

उत्तर :
व्याख्या :
The Network layer provides routing through an internetwork and logical addressing.

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

प्र: A receiving host has failed to receive all of the segments that it should acknowledge. What can the host do to improve the reliability of this communication session? 1308 05b5cc7e8e4d2b41977751ab6

प्र: When a station sends a transmission to the MAC address ff : ff : ff : ff : ff : ff, what type of transmission is it? 2416 05b5cc7e8e4d2b41977751ab1

उत्तर : 4. "Broadcast" व्याख्या :Answer: D) Broadcast Explanation: A transmission to the MAC address ff : ff : ff : ff : ff : ff is a broadcast transmission to all stations.

प्र: If a switch has three computers connected to it, with no VLANs present, how many broadcast and collision domains is the switch creating? 2193 05b5cc7e8e4d2b41977751aac

उत्तर : 3. "one broadcast and three collision" व्याख्या :Answer: C) one broadcast and three collision Explanation: If a switch has three computersconnected to it, with no VLANs present , one broadcast and three collision domains are created.

प्र: If a hub has three computers connected to it, how many broadcast and collision domains is the hub creating? 3118 05b5cc7e8e4d2b41977751aa7

उत्तर : 4. "One broadcast and one collision" व्याख्या :Answer: D) One broadcast and one collision Explanation: If a hub has three computers connected to it, one broadcast and one collision domain is created

प्र: What is the purpose of flow control? 1248 05b5cc7e8e4d2b41977751aa2

प्र: Which layer combines bits into bytes and bytes into frames, uses MAC addressing , and provides error detection? 1024 05b5cc7e8e4d2b41977751aa1

उत्तर : व्याख्या :The Data Link layer is responsible for the framing of data packets.

प्र: Which layer is responsible for converting data packets from the Data Link layer into electrical signals? 1363 05b5cc7e8e4d2b41977751aa0

उत्तर : व्याख्या :The physical layer takes frames from the Data Link layer and encodes the 1s and 0s into a digital signal for transmission on the network medium.

प्र: At which layer is routing implemented , enabling connections and path selection between two end systems? 1581 05b5cc7e8e4d2b41977751a9f

उत्तर : व्याख्या :The Network layer provides routing through an internetwork and logical addressing.

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

प्र: A receiving host has failed to receive all of the segments that it should acknowledge. What can the host do to improve the reliability of this communication session? 1308 0

प्र: When a station sends a transmission to the MAC address ff : ff : ff : ff : ff : ff, what type of transmission is it? 2416 0

उत्तर : 4. "Broadcast"
व्याख्या :
Answer: D) Broadcast Explanation: A transmission to the MAC address ff : ff : ff : ff : ff : ff is a broadcast transmission to all stations.

प्र: If a switch has three computers connected to it, with no VLANs present, how many broadcast and collision domains is the switch creating? 2193 0

उत्तर : 3. "one broadcast and three collision"
व्याख्या :
Answer: C) one broadcast and three collision Explanation: If a switch has three computersconnected to it, with no VLANs present , one broadcast and three collision domains are created.

प्र: If a hub has three computers connected to it, how many broadcast and collision domains is the hub creating? 3118 0

उत्तर : 4. "One broadcast and one collision"
व्याख्या :
Answer: D) One broadcast and one collision Explanation: If a hub has three computers connected to it, one broadcast and one collision domain is created

प्र: What is the purpose of flow control? 1248 0

प्र: Which layer combines bits into bytes and bytes into frames, uses MAC addressing , and provides error detection? 1024 0

उत्तर :
व्याख्या :
The Data Link layer is responsible for the framing of data packets.

प्र: Which layer is responsible for converting data packets from the Data Link layer into electrical signals? 1363 0

उत्तर :
व्याख्या :
The physical layer takes frames from the Data Link layer and encodes the 1s and 0s into a digital signal for transmission on the network medium.

प्र: At which layer is routing implemented , enabling connections and path selection between two end systems? 1581 0

उत्तर :
व्याख्या :
The Network layer provides routing through an internetwork and logical addressing.