Question Page | Examsbook

प्र: Which of the following is correct? 1241 0

उत्तर : 2. "Full- duplex Ethernet uses two pairs of wires"
व्याख्या :
Answer: B) Full- duplex Ethernet uses two pairs of wires Explanation:

प्र: Convert the following from decimal IP address to binary format. 192.168.10.15 1207 0

उत्तर :

प्र: Convert the following from binary format to decimal IP address. 11001100.00110011.10101010.01010101 1419 0

उत्तर :

प्र: Convert the following from binary format to hexadecimal 11001010.11110101.10000011.11101011 1025 0

उत्तर :

प्र: Identify the fields in the Data Link portion of an Ethernet frame? 843 0

उत्तर :
व्याख्या :
The fields in the Data Link portion of a frame include the Preamble, Start Frame Delimiter, Destination MAC address, Source MAC address, Length or Type, Data, and Frame Check Sequence.

प्र: Differentiate types of Ethernet cabling and identify their proper application? 1214 0

उत्तर :
व्याख्या :
The three types of cables that can be created from an Ethernet cable are straight-through (to connect a PC's or a router's Ethernet interface to a hub or switch), crossover (to connect hub to hub , hub to switch, switch to switch, or PC to PC), and rolled (for a console conection from a PC to a router or switch).

प्र: You want to implement a mechanism that automates the IP configuration, including IP address, subnet mask, default gateway, and DNS information. Which protocol will you use to accomplish this? 2068 0

उत्तर : 3. "DHCP"
व्याख्या :
Answer: C) DHCP Explanation: Dynamic Host Configuration Protocol (DHCP) is used to provide IP information to hosts on your network. DHCP can provide a lot of information, but the most common is Ip address, subnet mask, default gateway, and DNS information.

प्र: If you use either Telnet or FTP, what layer are you using to generate the data? 1482 0

उत्तर : 1. "Application"
व्याख्या :
Answer: A) Application Explanation: Both FTP and Telnet use TCP at the Transport layer; however, they both are Application layer protocols, so the Application layer is the best answer for this question.

प्र: Which of the following is correct? 1241 0

उत्तर : 2. "Full- duplex Ethernet uses two pairs of wires"
व्याख्या :
Answer: B) Full- duplex Ethernet uses two pairs of wires Explanation:

प्र: Convert the following from decimal IP address to binary format. 192.168.10.15 1207 0

उत्तर :

प्र: Convert the following from binary format to decimal IP address. 11001100.00110011.10101010.01010101 1419 0

उत्तर :

प्र: Convert the following from binary format to hexadecimal 11001010.11110101.10000011.11101011 1025 0

उत्तर :

प्र: Identify the fields in the Data Link portion of an Ethernet frame? 843 0

उत्तर :
व्याख्या :
The fields in the Data Link portion of a frame include the Preamble, Start Frame Delimiter, Destination MAC address, Source MAC address, Length or Type, Data, and Frame Check Sequence.

प्र: Differentiate types of Ethernet cabling and identify their proper application? 1214 0

प्र: You want to implement a mechanism that automates the IP configuration, including IP address, subnet mask, default gateway, and DNS information. Which protocol will you use to accomplish this? 2068 0

प्र: If you use either Telnet or FTP, what layer are you using to generate the data? 1482 0

उत्तर : 1. "Application"
व्याख्या :
Answer: A) Application Explanation: Both FTP and Telnet use TCP at the Transport layer; however, they both are Application layer protocols, so the Application layer is the best answer for this question.

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

प्र: Which of the following is correct? 1241 05b5cc7e7e4d2b41977751a66

उत्तर : 2. "Full- duplex Ethernet uses two pairs of wires" व्याख्या :Answer: B) Full- duplex Ethernet uses two pairs of wires Explanation:

प्र: Convert the following from decimal IP address to binary format. 192.168.10.15 1207 05b5cc7e7e4d2b41977751a65

उत्तर :

प्र: Convert the following from binary format to decimal IP address. 11001100.00110011.10101010.01010101 1419 05b5cc7e7e4d2b41977751a64

उत्तर :

प्र: Convert the following from binary format to hexadecimal 11001010.11110101.10000011.11101011 1025 05b5cc7e7e4d2b41977751a63

उत्तर :

प्र: Identify the fields in the Data Link portion of an Ethernet frame? 843 05b5cc7e7e4d2b41977751a62

उत्तर : व्याख्या :The fields in the Data Link portion of a frame include the Preamble, Start Frame Delimiter, Destination MAC address, Source MAC address, Length or Type, Data, and Frame Check Sequence.

प्र: Differentiate types of Ethernet cabling and identify their proper application? 1214 05b5cc7e7e4d2b41977751a61

प्र: You want to implement a mechanism that automates the IP configuration, including IP address, subnet mask, default gateway, and DNS information. Which protocol will you use to accomplish this? 2068 05b5cc7e7e4d2b41977751a5c

प्र: If you use either Telnet or FTP, what layer are you using to generate the data? 1482 05b5cc7e7e4d2b41977751a57

उत्तर : 1. "Application" व्याख्या :Answer: A) Application Explanation: Both FTP and Telnet use TCP at the Transport layer; however, they both are Application layer protocols, so the Application layer is the best answer for this question.

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

त्रुटि की रिपोर्ट करें

प्र: Which of the following is correct? 1241 0

उत्तर : 2. "Full- duplex Ethernet uses two pairs of wires"
व्याख्या :
Answer: B) Full- duplex Ethernet uses two pairs of wires Explanation:

प्र: Convert the following from decimal IP address to binary format. 192.168.10.15 1207 0

प्र: Convert the following from binary format to decimal IP address. 11001100.00110011.10101010.01010101 1419 0

प्र: Convert the following from binary format to hexadecimal 11001010.11110101.10000011.11101011 1025 0

प्र: Identify the fields in the Data Link portion of an Ethernet frame? 843 0

उत्तर :
व्याख्या :
The fields in the Data Link portion of a frame include the Preamble, Start Frame Delimiter, Destination MAC address, Source MAC address, Length or Type, Data, and Frame Check Sequence.

प्र: Differentiate types of Ethernet cabling and identify their proper application? 1214 0

प्र: You want to implement a mechanism that automates the IP configuration, including IP address, subnet mask, default gateway, and DNS information. Which protocol will you use to accomplish this? 2068 0

प्र: If you use either Telnet or FTP, what layer are you using to generate the data? 1482 0

उत्तर : 1. "Application"
व्याख्या :
Answer: A) Application Explanation: Both FTP and Telnet use TCP at the Transport layer; however, they both are Application layer protocols, so the Application layer is the best answer for this question.